Warmer or Cooling Tunnel

Warmer or Cooling Tunnel

The Salient Features Of this Product

Used for hot filled bottles like juice

Used for getting hot bottles from 90 / 95 degrees
to the room temperature of 30 – 35 degrees

COOLING TUNNEL FOR PET JUICE: It is used for getting hot bottles from 90 / 95 degrees to the room temperature of 30 – 35 degrees. It is used for hot-filled bottles like juice. After the hot fill, product and pasteurizing fast effective product cooling is required in order to maintain the product taste, appearance, and other important characteristics that are important to your product’s market potential. Inside the machine, the bottles and the cans lie on a plastic chain and thanks to an external gear motor go forward in the various sections encountering the upper showers, at different temperatures, until reaching the exit. The feed rate of the bottles and cans be set from an operating panel that allows to vary the duration of the cycle.

 

WARMER TUNNEL FOR CSD
Warming System is suggested for PET/Glass CSD bottles. The temperature is to be increased from 0-2deg to room temperature (approx. 23deg C). The warmer chambers are fabricated from SS 304. An overhead shower system is provided for dropping water at the required temperature in each stage. The first chamber water temperature is maintained @ 35-40 degC, the 2nd chamber @ at room temperature (approx. 25-30deg C). A linear polyamide conveyor belt is used in the chamber to transfer the bottles through the water shower. The conveyor belt speed is synchronized by the VFS provided as per the requirement.

Each chamber is provided with a water storage tank wherein the hot water is to be supplied by the Customer. Each tank will be insulated & provided with a temperature indicator.

Water Pumps are provided for each chamber for the circulation of water. Suitable controls & pipelines are provided to maintain the temperature. It should be noted that soft water should be used for the warming process as groundwater may form scalings on the product.

LEADING MANUFACTURER

OUR PRODUCTS

Auto Shrink Sleeve Applicator (Body)

Auto Shrink Sleeve Applicator (Body)

Auto Shrink Sleeve Applicator (Cap)

Auto Shrink Sleeve Applicator (Cap)

Hot-Melt Glue Labelling Machine (BOPP Labeller)

Shrink Wrapper

Shrink Wrapper

Automatic Both Side Sticker Labelling Machine

Automatic Both Side Sticker Labelling Machine

Electrical Tunnel

Electrical Tunnel

Steam Tunnel

Steam Tunnel

L Sealing Machine

L Sealing Machine

Top Sticker Labelling

Top Sticker Labelling

Warmer or Cooling Tunnel

Warmer or Cooling Tunnel

OUR TRUSTED CLIENTS

OUR ESTEEMED CLIENTS